水上游乐设备前一种水滑梯设备是供游人滑行的设备，其结构的安全性、稳定性非常重要。那么水上滑梯设备怎么设计符合相关标准？水上滑梯生产厂家为您讲解。

The water slide equipment before the water amusement equipment is the equipment for tourists to slide, and the safety and stability of its structure are very important. How can the water slide equipment be designed to meet relevant standards? The water slide manufacturer will explain for you.

水上乐园设备中的水上游乐设施，属于特种设备的范畴，等级为B级，每套设备均要经过特种设备检测院的检查、检测和验收，出具合格证后方可使用。水滑梯设备大部分安装在室外，自然环境对滑梯结构的影响很大。

The water amusement facilities in the equipment of the water park belong to the category of special equipment, with a grade of B. each set of equipment must be inspected, tested and accepted by the special equipment testing institute, and can be used only after a certificate of conformity is issued. Most of the water slide equipment is installed outdoors, and the natural environment has a great impact on the slide structure.

因此，在水滑梯设计阶段，须对其结构进行强度、刚度、疲劳强度、稳定性、抗倾覆性和防侧滑性计算分析，达到相应规范要求的安全系数，编写正规的计算说明书，并有特种设备检测院具有相应资质的工程师审核，出具鉴定报告后方能投产，首套设备须由特种设备检测院专业的、具有相应资质的工程师现场检验，出具型式试验报告后方能使用和批量生产。

Therefore, in the design stage of the water slide, the strength, stiffness, fatigue strength, stability, anti overturning and anti sideslip of its structure must be calculated and analyzed to meet the safety factor required by the corresponding specifications, and the formal calculation instructions must be prepared. The first set of equipment must be professional Engineers with corresponding qualifications shall conduct on-site inspection and issue type test reports before use and mass production.

对于水上乐园设备中水滑梯设备结构进行计算分析时，须考虑荷载、活荷载、风荷载、雪荷载、地震荷载和冲击荷载。荷载在水滑梯设备中一般为话题的自重；活荷载只乘坐人本身的荷载和水荷载；风荷载分为工作状态荷载和非工作状态荷载，游乐设施的设计中按运行风速15m/s计算工作状态的风荷载，非工作状态按设备安装地50年一遇的风荷载计算；

Load, live load, wind load, snow load, seismic load and impact load shall be considered when calculating and analyzing the water slide equipment structure of the water park equipment. The load in the water slide equipment is generally the self weight of the topic; The live load is only the load of the occupant and the water load; The wind load is divided into working state load and non working state load. In the design of amusement facilities, the wind load in working state is calculated according to the operating wind speed of 15m / s, and that in non working state is calculated according to the wind load once in 50 years in the place where the equipment is installed;

雪荷载按设备安装地50年一遇的风荷载计算；计算地震荷载时，按设防烈度8度，相当于设计基本加速度0.2g计算；计算冲击荷载时，游乐设施在运动过程中有可能出现冲击，设计时一般无法准确计算。因此，在进行强度计算时，其荷载和活荷载须乘以冲击系数，在水滑梯设备中根据其速度，选用冲击系数相应的冲击系数。

The snow load is calculated according to the wind load once in 50 years at the equipment installation site; When calculating the seismic load, it is calculated according to the fortification intensity of 8 degrees, which is equivalent to the design basic acceleration of 0.2g; When calculating the impact load, the amusement ride may have impact during its movement, which can not be calculated accurately in design. Therefore, in strength calculation, the load and live load must be multiplied by the impact coefficient. In water slide equipment, the impact coefficient corresponding to the impact coefficient is selected according to its speed.

水上乐园设备中水滑梯结构包括玻璃钢滑道、钢结构、混凝土基础三大部分。鉴于水滑梯设备结构的特殊性、重要性、复杂性、在水滑梯结构分析上引入有限元方法，有限元法适用于水滑梯设备中的各种复杂机构，成为了行之有效的分析手段之一。引入后，改变了传统分析法，是受力分析更准确、更多面，更有利于水滑梯结构校核和设计优化。

The water slide structure of the water park equipment includes three parts: FRP slide, steel structure and concrete foundation. In view of the particularity, importance and complexity of the structure of the water slide equipment, the finite element method is introduced into the analysis of the water slide structure. The finite element method is applicable to various complex mechanisms in the water slide equipment and has become one of the effective analysis methods. After the introduction, the traditional analysis method is changed, and the stress analysis is more accurate and more faceted, which is more conducive to the structural check and design optimization of the water slide.

水滑梯是水上乐园必不可少的一个水上游乐的项目，一般水上乐园设施的厂家通常是使用玻璃钢进行水滑梯制作，且其制作一定要符合国家有关标准，这样才能保证水上乐园设备的质量。更多设备的认识就来我们网站https://www.hcseaworld.com了解吧！

The water slide is an indispensable water amusement project in the water park. Generally, the manufacturers of water park facilities usually use glass fiber reinforced plastic to make water slides, and the production must conform to the relevant national standards, so as to ensure the quality of water park equipment. For more information about equipment, please visit our website https://www.hcseaworld.com Understand!