循环水泵也是平时较为常见的水泵之一，今天室内水上乐园设备厂商就来讲讲它的检修内容，这样才能够在水泵出问题的时候更好的进行故障的排查。

The circulating water pump is also one of the more common pumps. Today, the manufacturer of indoor water park equipment will talk about its maintenance, so that it can better troubleshoot when the water pump has problems.

1、将循环水泵进行拆卸。

1. Disassemble the circulating water pump.

2、做好循环水泵检修时须的安全措施。

2. Take safety measures for maintenance of circulating water pump.

3、拆除循环水泵进出口相连的管路，做好连接处的相应记录工作。

3. Remove the pipelines connecting the inlet and outlet of the circulating water pump, and make corresponding records at the connections.

4、拆掉电机机座连接螺栓并且做好记录工作。

4. Remove the connecting bolts of the motor base and make records.

5、拆掉泵盖和泵体的连接螺栓。

5. Remove the connecting bolts between the pump cover and the pump body.

6、把电机连同叶轮一起吊出泵体，注意不能损坏叶轮。

6. Lift the motor and impeller out of the pump body, and be careful not to damage the impeller.

7、把叶轮右旋紧螺母拧掉。用拉马把叶轮缓慢拉出，将传动键取下，注意不能损坏叶轮与传动键。

7. Unscrew the right tightening nut of the impeller. Use puller to slowly pull out the impeller and take down the drive key. Be careful not to damage the impeller and drive key.

8、用手把泵轴机械密封缓慢取出，拆掉泵盖和电机连接螺栓，把泵盖和挡水圈轻轻取下。

8. Take out the mechanical seal of pump shaft slowly by hand, remove the connecting bolts of pump cover and motor, and gently remove the pump cover and water retaining ring.

9、对循环水泵进行清洗检查并且维修处理。

9. Clean, check and repair the circulating water pump.

循环水泵在使用期间的九大检修要点就是这样了，您对此有什么想了解的内容就来我们网站https://www.hcseaworld.com咨询吧！

This is the nine major maintenance points of the circulating water pump during its use. If you want to know anything about this, please come to our website https://www.hcseaworld.com Consult!